Blog

ADR, RevPAR and occupancy: which one drives labor

· labor cost, scheduling, hotel metrics

Occupancy is the share of your rooms that were sold, ADR (average daily rate) is the average price of the rooms that were sold, and RevPAR (revenue per available room) is room revenue divided by every room you have, sold or not. For labor planning, occupancy and the count of rooms sold drive housekeeping hours, ADR drives almost nothing about hours but a lot about labor percentage, and RevPAR is a summary of the other two. Mix them up and a schedule follows the wrong number.

The three metrics, defined

All three come from the same two inputs: how many rooms you sold and how much room revenue they brought in.

  • Occupancy = rooms sold ÷ rooms available. 28 rooms sold out of 40 is 70%.
  • ADR = room revenue ÷ rooms sold. $2,380 across 28 rooms is $85.00.
  • RevPAR = room revenue ÷ rooms available. $2,380 across 40 rooms is $59.50. It also equals ADR × occupancy: $85.00 × 0.70 = $59.50.

Rooms available means every room that could have been sold, so a room out of order is a judgment call you should write down. Out-of-order vs out-of-service rooms covers the two conventions. Room revenue means the room charge, not parking, pet fees or breakfast.

Which metric drives which labor decision

DecisionWhat it depends onMetric
Housekeeping hours for the dayRooms to clean: checkouts and stayoversOccupancy (rooms sold), and the mix of departures to stayovers
Front desk hoursHours the desk is open, plus arrivals and departures at peaksMostly fixed; arrivals loosely
Night audit coverageWhether the property operates overnightFixed
Labor percentage of revenueLabor dollars ÷ room revenueADR and occupancy both
Whether a day was well runLabor against revenue earnedRevPAR

The key line is the first one. A housekeeper cleans a room in about the same minutes whether it sold at $75 or $110. A room that earned $110 does not need more cleaning, at least not unless the higher rate buys a larger room type. So ADR should not change how many people you schedule. It changes whether the cost of those people looks heavy.

A worked example

An invented 40-room interior-corridor motel near a regional airport. Two days with different shapes. The housekeeping figure uses a placeholder of 30 minutes of housekeeping labor per sold room on average, blending checkouts and stayovers, and a placeholder wage of $16 an hour. Your own minutes will differ, so measure them.

Day ADay B
Rooms sold2820
Room revenue$2,380$1,800
Occupancy70%50%
ADR$85.00$90.00
RevPAR$59.50$45.00
Housekeeping minutes (30 per sold room)840600
Housekeeping hours14.010.0
Housekeeping cost at $16$224$160
Housekeeping as % of room revenue9.4%8.9%

Check the arithmetic: Day A, 28 × 30 = 840 minutes, ÷ 60 = 14 hours, × $16 = $224, ÷ $2,380 = 9.41%. Day B, 20 × 30 = 600 minutes = 10 hours, × $16 = $160, ÷ $1,800 = 8.89%.

Two readings follow from this.

  1. Day B had a higher ADR ($90 against $85) and a worse RevPAR. A higher average rate can come from selling fewer of the cheaper rooms, so the average rose while the total fell. If you used ADR to judge the day, you would call B better. RevPAR says A.
  2. Hours moved with rooms sold, not with ADR. 28 rooms needed 14 hours and 20 needed 10. The cost percentage is nearly flat between the days because both revenue and labor fell together, which is what it should do when you schedule to rooms sold. If Day B had been scheduled at Day A’s 14 hours, the same 20 rooms would have shown $224 ÷ $1,800 = 12.4%, and that is the number that would prompt a conversation.

For the gap between sold rooms and the work they create, see stayover vs checkout cleaning time. Twenty rooms sold can be 20 checkouts or 20 stayovers, and the hours differ. Occupancy gives you the first-pass estimate and departures give you the second.

Using the metrics together

A workable weekly routine:

  1. Forecast rooms sold for each day, from your reservation system or your own history.
  2. Split that into expected checkouts and stayovers. Tomorrow’s arrivals are not the work; today’s departures are.
  3. Convert to housekeeping minutes using your measured minutes per checkout and per stayover. Hours per occupied room vs headcount takes this step in detail.
  4. Schedule to the minutes. Round up to whole shifts only where you must.
  5. After the day, compute the labor percentage and RevPAR and put them beside the plan. If the percentage moved and the hours did not, ADR moved. If hours moved and the percentage did not, you scheduled to the rooms. The first is a pricing conversation and the second is working as intended.

One more figure ties occupancy to hours: minutes per occupied room, sometimes called MPOR. If your hours come from a time clock rather than memory, you can start a free trial and see hours and per-occupied-room figures beside your own room counts. What is MPOR defines it.

When this breaks

  • Different room types. A suite or a kitchenette room takes longer to clean. If your ADR is high because the mix includes those rooms, ADR does correlate with minutes. Track minutes by room type if the mix is wide.
  • Comp and house-use rooms. They need cleaning and earn nothing. For hours, count them as rooms to clean, because the work exists. For ADR and RevPAR they add no revenue, so decide whether they sit in rooms sold and write the choice down. If cleaned rooms are in your hours but not in your room count, minutes per room will look inflated.
  • Group blocks. A big group checking out at once concentrates the work at one hour. Daily totals hide that.
  • Forecast error. Your forecast of rooms sold will be wrong. Scheduling to a forecast that’s wrong covers what to do when the morning number differs from last night’s.
  • The front desk. It stays staffed at 20% occupancy or 100%. Occupancy changes how busy the desk is, not whether someone is behind it.

Start seeing what labor actually costs

Set up your property, put staff on the clock, and read tomorrow morning’s labor number.

14-day free trial · No credit card · Cancel anytime