Linen par levels for a motel: the arithmetic
· housekeeping, linen, laundry
A linen par level is the number of full sets of linen you need in circulation per bed, and for a motel that washes its own linen it is usually between 3 and 4, a common planning range. Multiply rooms by beds by par and you have the sets to own. The par you need depends mostly on one thing, which is how long a soiled sheet takes to come back clean, so a property with a washer on site needs fewer sets than one that sends linen out and waits two days. This post works the arithmetic on an invented motel and then shows what makes the number fail on a real Friday.
The property is invented: a 36-room interior-corridor motel outside Wichita, Kansas, every room with two queen beds, laundry done on site. The load sizes and times are placeholders to be replaced with your machines’ real figures.
The linen par formula: rooms x beds x par
Par is a multiple of one full set. “Par 1” is enough linen to dress every bed in the building once. You need more than that because linen is never in one place.
Think of where a sheet set can be at any moment:
- On the bed
- Soiled, in a bag or a cart, waiting for the wash
- In the washer or dryer
- Clean and folded on the shelf, ready to go back out
If your laundry turns a set around inside a day, the sets in positions 2 and 3 come back before the next morning, and three positions are enough. That is par 3. If a set takes two days to come back, because you ship it out or the laundry only runs on some days, you need a fourth position, and par 4 is the safer number.
At the example motel:
- Beds: 36 rooms × 2 beds = 72 beds
- Par 3: 72 × 3 = 216 sheet sets
- Par 4: 72 × 4 = 288 sheet sets
Do the same for bath towels. If you stock 3 bath towels per room on the bed-side set (two guests plus a spare, an invented rule), the base set is 36 × 3 = 108 towels, and par 3 is 324. Towels are the item that gets taken, stained and thrown out most often, so many properties keep a slightly higher par on towels than on sheets. That is a local call, not a rule.
What laundry turnaround does to par
Turnaround is the lever. Here is the same property under two assumptions.
| Laundry setup | Positions needed | Par | Sheet sets to own |
|---|---|---|---|
| On site, runs daily | 3 | 3 | 216 |
| On site, runs 5 days a week | 3.5 | 4 | 288 |
| Outsourced, pickup every other day | 4 | 4 to 5 | 288 to 360 |
A difference of 72 to 144 sheet sets is real money to buy, to store and to count. If sheet sets cost an invented $30 each, par 3 versus par 5 is 144 sets, which is $4,320 sitting on a shelf. The comparison of doing it yourself versus sending it out is in in-house vs outsourced hotel laundry; this post only covers how many sets each choice implies.
How the daily laundry load follows from par
Say 70% occupancy: 25 occupied rooms. On an average day, about 13 are checkouts and 12 are stayovers. Checkouts get fresh sheets on both beds, so 13 × 2 = 26 sheet sets enter the wash. Stayovers do not get sheets changed each day at many properties (the every-third-day approach covers that), so they are left out here.
If a washer takes four sets a load (an invented capacity, check yours), 26 ÷ 4 is 6.5, so seven loads. With one washer and one dryer, at roughly an hour each per load running in parallel, that is about 7 to 8 hours of machine time and roughly the same time for someone to load, fold and carry. That person is a paid laundry hour, and it belongs on the schedule, not hidden in a housekeeper’s day. Par and staffing are the same question asked twice.
What breaks the par number
The formula assumes an ordinary day. These are the days that empty the shelf.
- A sellout. At 36 of 36 rooms and mostly checkouts, you need 72 sets in a day. Par 3 holds exactly 72 on the shelf, so day one works. But 72 soiled sets cannot be washed in a day at 18 loads, so the next morning’s shelf is thin. A sellout followed by another strong night is where a par 3 property runs short.
- A broken machine. One dryer down for two days cuts throughput and the shelf drains. Par is partly insurance against this.
- Missed pickup. For outsourced linen, a vendor that skips a day takes your effective turnaround from two days to three.
- Attrition. Linen wears out and goes missing. Count discards for a month; if you lose 15 sets a month, you must buy them or the par shrinks quietly.
- A slow week for no one. Linen sitting in a hamper over a weekend because nobody is on the laundry schedule is a staffing gap, not a stock gap.
Checking your par in practice
You do not have to guess. Count the clean sets on the shelf at the end of a normal morning, then at the end of the busiest morning of the month. If the shelf drops under one day’s checkout need, par is too low. If it never drops under a day and a half, par is generous.
Then look at labor. If the shelf is empty at 11 AM and an attendant is standing at the washer, that wait is paid time that the room quota did not budget. Cart and restock minutes are a different cost from linen shortage, but both come out of the same shift.
What a tool can and cannot do here
ProfitClock tracks housekeeping tasks and time, so laundry shifts can be scheduled and clocked like any other, and you can see how many hours the laundry takes. It does not track linen inventory; for that, a clipboard count or a spreadsheet is enough at a motel’s scale. If you want the task and time side in one place, read about housekeeping in ProfitClock.
Par is not a fixed number. It is the answer to “how long is a sheet away from the bed,” and when that answer changes, par changes.
Start seeing what labor actually costs
Set up your property, put staff on the clock, and read tomorrow morning’s labor number.
14-day free trial · No credit card · Cancel anytime