Hotel room turnaround time: checkout to check-in gap
· housekeeping, operations, labor planning
Hotel room turnaround time is the number of minutes between a guest checking out and that room being marked clean and ready to sell, and the number to plan against is not the average but the slowest one in five. The cleaning itself is the smallest part. At the invented property below, a 24-minute checkout clean sits inside an elapsed turnaround that is often over an hour, because the room waited for the guest to leave, for an attendant to be free, and for someone to say it was done.
Property for the numbers: a 60-room exterior-corridor motel outside Tulsa, Oklahoma, with an 11:00 checkout, a 3:00 check-in, four housekeepers on the day, a measured 24-minute checkout clean, and a $16/hr placeholder wage. All of it is invented; the method is what travels.
What fits between 11 and 3
Four hours is 240 minutes. Not all of them are usable.
| Step | Typical wait or work | Notes |
|---|---|---|
| Guest leaves | 8:00 to 11:30 | Departures spread out; some linger past 11 |
| Room marked ready to clean | 0 to 40 min after departure | Depends on who tells housekeeping |
| Waiting for an attendant | 0 to 60 min | Longest on the busiest morning |
| The clean | 24 min | Measured at this property |
| Inspection or check, if you do one | 5 to 15 min | Skipped in many motels |
| Marked ready at the desk | 0 to 20 min | Often forgotten |
The clean is the one number you control directly. The rest is queueing, and queueing grows quickly as the building fills.
Why the last few rooms are the ones that run late
Turnaround is rarely every room being slow. It is the last few rooms on the day with the most checkouts, because attendants can only clean rooms that are empty, and the queue forms behind the late departures. The full capacity arithmetic, how many attendants a given checkout count needs and how to stagger starts, is in the housekeeping schedule window post; this post stays on the gap itself.
At the Tulsa motel, 30 checkouts is 30 × 24 = 720 minutes of cleaning. Four attendants working 9:30 to 3:00 have 330 minutes each. Take out 180 for cart setup, linen runs, walking, a break and the stayovers that also have to be done, and about 150 productive minutes remain. Four people × 150 = 600 minutes, 120 short of 720, which is five rooms at 24 minutes. Those five are the ones the desk learns about when the first arrivals walk in.
How to measure hotel room turnaround time without a project
You do not need new software to start. For two weeks, write down three timestamps for every checkout room:
- Departure time, from the key return, the front desk check-out, or the housekeeper’s first sight of an empty room.
- Clean start, when an attendant enters.
- Ready time, when the room is released as clean.
Subtract. Then compute the median and the 80th percentile of the departure-to-ready gap by day of week. The 80th percentile is the number you plan against, since that is the room a guest is waiting in the lobby for.
If your cleaning tasks are recorded in the system you already use, you can get part of this without a clipboard. In ProfitClock, housekeeping tasks are generated each night in the property’s timezone from room status, and each task records when it was started and finished, so the clean-time portion is on record. The departure and ready-release times still depend on someone updating room status, which is the manual part at every property.
Reading your own numbers: a sample two weeks
Suppose the Tulsa motel logs 140 checkout rooms over two weeks and sorts the departure-to-ready gaps. The median comes out at 68 minutes and the 80th percentile at 112. Most rooms look fine, and the 112 is the room that was not ready when the guest arrived. Then split it by component, averaged over the slowest fifth:
| Component | Rooms near the 80th percentile |
|---|---|
| Departure to “ready to clean” | 24 min |
| Waiting for an attendant | 41 min |
| The clean | 26 min |
| Clean to “ready” at the desk | 21 min |
This sample is invented, but the shape is common: the clean is about a quarter of the elapsed time, and the two handoff steps (nobody told housekeeping, nobody told the desk) are a bigger share than most owners expect. That points at a radio call and a status change, not at another attendant.
Where the gap breaks, and what to do about each
- Departures tell nobody. The desk checks a guest out at 10:15 and housekeeping learns at noon. Fix: one radio call or one status change at checkout, nothing more.
- Everyone leaves at 11:00. You cannot move guests; the schedule window post above covers how to start the rooms that left early.
- No one releases the room. The room is clean and unlisted for forty minutes. Fix: the attendant marks it clean when done, not at the end of the route.
- A DND room at checkout time. Do-not-disturb rooms need a policy, not a guess, or they absorb an attendant’s morning.
- Stayovers competing with checkouts. Do checkouts first and stayovers after the 3:00 arrivals are covered. The stayover versus checkout times show why one room of each is not the same job.
What a faster turnaround is worth
Take the five late rooms. One more attendant covering the same 9:30 to 3:00 window is 5.5 hours × $16 = $88 a day, or $616 for a week of days like this one. On the same basis as above, that person adds 150 productive minutes, which is 150 ÷ 24 = about 6 rooms. That covers the five late ones with one to spare. Whether it is worth it depends on what a late room costs you: a comped night, a bad review, a walk. If you rarely run full, it is not worth it every day, and the answer is a part-time or on-call attendant for the heavy days only.
A cheaper lever is sequencing. Of 30 checkouts, a handful have an early arrival waiting for them, and you can clean those first. That is the early check-in priority order.
When turnaround is the wrong metric
At a property that runs 45% occupancy, the check-in window is rarely the constraint, and chasing it makes you overstaff the morning. At a property with long stays, most rooms are stayovers and the stayover cycle is the number. And on a day when you are sold out and half the guests are late checkouts, no staffing plan fixes it; that is a front desk policy conversation.
Measure two weeks, look at the worst fifth, and change the one thing in the table that is costing you the most minutes.
Start seeing what labor actually costs
Set up your property, put staff on the clock, and read tomorrow morning’s labor number.
14-day free trial · No credit card · Cancel anytime